LIFE OF THE CONCRETE WARRANTY
PERMANENT MOISTURE CONTROL
MOISTURE STOP PLUS
MOISTURE STOP PLUS
Manufactured, engineered & warranted to control moisture at levels tested up to 100% RH (ASTM 2170) and up to 25 lbs MVER (ASTM 1869).
SAFE & EASY APPLICATION:
Spray applied, using an approved high volume, low pressure (HVLP) mechanical sprayer. Fast turnaround allows foot traffic and working trades on treated concrete in as little as 2 hours after application.
PROVEN EFFECTIVE:
Over 20 years of success, with a proven track record of success and ZERO failures. Research and independent 3rd party testing done by Middle Tennessee State University, Flood Labs, and University of Illinois, Chicago.
LIFE OF THE CONCRETE WARRANTY:
The warranty covers both materials and labor, against any failure related to excessive moisture vapor emissions, and is only valid if the application is performed a Concrete Earth trained & approved applicator.
STOP MOISTURE PROBLEMS AT THE SOURCE
LIFE OF THE CONCRETE WARRANTY
The warranty period is for the useful Life of the Concrete from the date of installation, and covers all applied floor covering materials and/or coatings against failure from excessive moisture vapor emissions.
The warranty is limited to proven failure(s) due to water vapor transmissions from within the parent concrete substrate and not from topical surface intrusion, transfer or migration from an outside source such as flooding or seepage through to floor from wall joints below grade.
The Warranty covers demolition & removal of failed materials in the area(s) of failure, the application of a secondary moisture mitigation treatment, and the replacement costs of the existing floor covering and or coating system, including all preparation materials, and all direct job related labor charges.
All Warranty claims must be proven by an independent laboratory from within the flooring and or moisture mitigation industry. All proven claim sites are subject to site access by an authorized CE representative to perform mandatory inspections and on site testing.
The Warranty is subject to the following conditions:
-
The Product must be applied in accordance with Concrete Earth Specifications & Guidelines regarding approved substrates and meet acceptable industry standards as defined in ACI Committee 201 Report, Guide to Durable Concrete. If the areas to which the products are applied fail to meet these standards, the warranty offer shall be void.
-
All resilient floor coverings must be installed on a properly prepared substrate as identified under ASTM F710-11 and further subject to the chosen floor covering’s manufacturer standards of application.
-
Coatings must be applied to a substrate profiled according to the chosen coating’s manufacturer standards of application.
-
The mandatory Warranty Request Form must be filed with Concrete Earth's corporate office within 14 days from the date of application.
-
The warranty is further subject to the conditions of the concrete substrate, which must be structurally sound, and free of structural cracks, voids or substrate repairs post placement.
-
The warranty is conditional to the approved completed Warranty Request Form on file, completed by an approved Concrete Earth on-site representative or authorized applicator.
-
Floor coverings and/or coatings may be installed from 24 up to 72 hours post application or anytime thereafter, as indicated by the on-site Concrete Earth representative or approved installer, based on substrate conditions, moisture content prior to the application, and site conditions. Any deviation from the stated waiting time will null this warranty.
Subject to all the conditions described herein, provided that the Product has been installed, made available and is used for its intended use, CE will be responsible for reinstatement of the flooring materials as listed above, which naturally result from the breach of this warranty caused by a defect in the material.
The account related to the warranty must be paid in full prior to any warranty being effective.
