A USER-FRIENDLY, ENVIRONMENTALLY SAFE, WHITE (CLEAR-DRYING), NON-FLAMMABLE, PENETRATING LIQUID WHICH IS NON TOXIC, WITH ZERO VOC.
MOISTURE STOP
MOISTURE STOP
PERMANENT INTEGRAL MOISTURE BARRIER
Our most prolific formulation for integral waterproofing, resistance to acid/chemical contaminant attacks, to mitigate moisture vapor emission and Alkali Silica Reactivity (ASR), and as a pre-treatment to ensure sustainability of surface coatings or floor covering materials. Excellent curing compound for interior surfaces.
DRYCRETE™ Moisture Stop PLUS is a user-friendly, environmentally safe, white (clear-drying), non-flammable, penetrating liquid which is non-toxic, with zero VOC. It readily penetrates deep into substrate, using concrete's natural porosity, depositing internally produced colloidal silicate residual (gel), that subsequently form an insoluble unique 100% solids water and contaminant barrier, as it reacts with un-hydrated cement (free alkali) within the concrete slab. This 100% solids integral barrier contains its very own extremely tiny pore network, uniquely and effectively mimicking the pouring of concrete within concrete.
RECOMMENDED USE: DRYCRETE™ Moisture Stop PLUS is recommended as a densifier and moisture vapor blocker prior to the application of cementitious overlays, epoxy coatings, traditional flooring materials, and in concrete polishing applications. It can be used for related decorative concrete applications including flatwork, stamped and textured concrete, concrete counter tops, concrete masonry units, stucco, mortar, grout, and most any other Portland cement based surface
PROVIDES CONCRETE ALL OF THE BENEFITS GAINED FROM A HIGHLY EFFECTIVE CURING METHOD.
CURE SHIELD
CURE SHIELD
ALL THE BENEFITS OF A WET CURE WITH ADDED SURFACE PROTECTION
As close to “wet” cure benefits, with greatly reduced permeability, greater hydration and density, and added chemical resistance.
CURE SHIELD effectively retards evaporation during the curing process, while maintaining a sustainable waterproofing and acid/solvent resistant barrier on the surface of the concrete.
Cure Shield is an excellent concrete curing agent, providing a results equal to water cured concrete.
Cure Shield is water based, environmentally safe, user friendly, odorless, non-toxic, with zero VOC content. It significantly decreases concrete’s permeability, and significantly increases abrasion resistance , protects against freeze-thaw damage, stops dusting, and protects against acid/salt and other contaminant attacks and resulting damage.
THE PROCESS: Cure Shield provides special ingredients to the yet available capillary mix water waiting to participate in hydration’s reaction rates/processes, generating increased volumes of cement paste in a significantly shorter period of time, utilizing all of the remaining capillary water and leaving none to later evaporate thus leaving void spaces.
As a result of utilizing all remaining capillary mix water, the concrete’s capillary void spaces become more segmented and smaller than usual. This greatly diminishes porosity/permeability by causing further utilization of the still available mix water content.
CURE SHIELD greatly improves concrete's strength, surface hardness and impermeability, which translates to longer sustainable durability.
RECAP:
-
Significantly improves hydration and concrete density
-
Provides a permanent integral moisture barrier & surface protection
-
Reduces permeability by >90%.
-
Eliminates freeze-thaw damage.
-
Excellent acid /salt and solvent resistance.
-
Environmentally neutral and user friendly.
REBAR PROTECTOR
AN ENVIRONMENTALLY FRIENDLY LONG TERM SOLUTION TO PROTECT EMBEDDED STEEL IN CONCRETE STRUCTURES
REBAR PROTECTOR
CONCRETE DENSIFYING SOLUTION WITH CORROSIVE INHIBITOR
Demonstrates all of the benefits of Moisture Stop, with added compounds to prevent rust development in embedded steel, as well as to halt and further inhibit corrosive agents in existing concrete where there are visible signs of active degradation.
Drycrete Rebar Protector offers an environmentally friendly long term solution to protect embedded steel in concrete surfaces, without sacrificing the integrity of the concrete in any way. It provides all of the benefits of Drycrete permanent moisture control, with additional ingredients to actively seek out the surface of the internally embedded steel (rebar) and halt corrosive deterioration, while providing a permanent and effective barrier against continued corrosion of the steel.
BENEFITS:
-
Exhibits deep penetration - from 3" to 5" or more - based on concrete porosity and/or permeability.
-
Eliminates of greatly reduces soluble chloride without affecting insoluble chloride or reducing pH value.
-
Neutralizes hydrochloric acid & other catalysts needed to promote oxidation-reduction reaction (corrosion).
-
Arrests and / or prevents corrosion on embedded steel.
